Aircraft Maintenance Stairs

 

 

Standard Maintenance Stair (2/3/4 Step)-MST2-MST4-900

The maintenance stair is used for carrying out inspection and maintenance work on aircraft. The aircraft maintenance stair designed and engineered may be used on different aircraft type whether at the apron or at aircraft maintenance hangar, in order to carry out inspection and maintenance tasks. The stair height must be adapted to the working height. The maximum load specified for the stair (sign on the stair riser) must not be exceeded. The unit must not be used for transporting persons, objects or for other purposes.

Download brochure

Standard Maintenance Stair (5/10/..19 Step, Towable)

The maintenance stairs are used for carrying out inspection and maintenance work on aircraft. The type designation RC identifies that the maintenance stair is equipped with a reinforced chassis and a towing hook; designed for towing up to 25 km /hr. The maintenance stairs consist of the running gear with the stairs and platform. The step height is 250 mm, and the last step is designed as a platform. The running gear is provided with two wheels rear and front. The front axle is articulated, the rear axle is rigid. The stairs are equipped with a fixed railing, and the platform is provided on both sides with a swivel railing with integrated safety gates for the front. These steps are also available in lengths of 1600 mm and 2000 mm and without a towing arm.

Download brochure

Standard Maintenance Stair (5/6/7/9..19 Step) MST5- MST19-1200

The maintenance stairs are used for carrying out inspection and maintenance work on aircraft. The maintenance stairs consist of the running gear with the stairs and platform. The step height is 250 mm, and the last step is designed as a platform. The stairs are equipped with a fixed railing, and the platform is provided on both sides with a swivel railing with integrated safety gates for the front. A tow bar for towing operation can optionally be fitted to the maintenance stair. These steps are also available in lengths of 1600 mm and 2000 mm and the RC model is towable up to 25 km/hr.

Download brochure

Maintenance Platform B777- MP-B777/MLG-LH or MP-B777/MLG-RH

The maintenance platforms are used to perform inspection and maintenance work on the Main Landing Gear on the left and right side of the B777. The maintenance platform consists of a chassis with Towbar, a platform with stairway and 4 extendable platforms. The chassis is fitted with two castor wheel at the front and rear, the rear castor wheels are provided with direction locks. The stairway is equipped with a fixed railing and extendible railings on the left and right side

Download brochure

Maintenance stair 12 Step-MST12-P.A.S.

The maintenance stairs are used for carrying out inspection and maintenance work on aircraft, particularly in the pylon area above the engine. The maintenance stairs consist of the running gear with the stairs and platform. The step height is 250 mm, and the last step is designed as a platform. The stairs are equipped with a fixed railing. The platform is provided on both sided with a fixed railing with integrated, swivel safety gates for the front edge of the platform. The chassis is equipped with a turntable steering and a towing hook.

Download brochure

Maintenance stair 20 Step MST20-2400

The aircraft maintenance stair has been designed and engineered for for aircraft type A330, A340-300 / -600, in order to carrying out inspection and maintenance tasks. The stair may be used for door 3 (A330, A340-300) and door 4 (A340-600) as well as on wings. The maintenance stairs consist of the running gear with the stairs and platform. The step height is 250 mm, and the last step is designed as a platform. The stairs are equipped with a fixed railing. The platform has on both sides a sliding railing and a platform door for the front. The maintenance stairs can be used either on the airport apron as well as in hangar.

Download brochure

Maintenance Platform A 320F- MP-A320F

The maintenance platform has been designed and engineered for the Airbus A319 and A320 family, in order carry out inspection and maintenance task inside the main landing gear wheel well compartment. The maintenance platform consists of a chassis and a platform with two stairs on the right and left side. The chassis is fitted with two castors at front and rear. The stairs are equipped with a fixed railing and a swivel railing.

Download brochure

Maintenance stair 10 Step- MST10-NC/A380

The maintenance stairs MST10-NC/A380 and MST14-NC/A380 are used for inspection and maintenance work on the aircraft type Airbus A380 in the nose cowl area for engine 2+3 and 1+4. The maintenance stair consists of the frame with staircase and platform. The step height is 250 mm, the last being designed as a platform. The frame is provided at the front with two castors and the rear with two rollers. The stair case is equipped with fixed railings, and the platform is provided on both sided with a short railing with pendulum gate.

Download brochure

Maintenance stair 14 Step-MST14-NC/A380

The maintenance stairs MST14-NC/A380 and MST10-NC/A380 are used for inspection and maintenance work on the aircraft type Airbus A380 in the nose cowl area for engine 1+4 and 2+3. The maintenance stair consists of the frame with staircase and platform. The step height is 250 mm, the last being designed as a platform. The frame is provided at the front with two castors and the rear with two rollers. The stair case is equipped with fixed railings, and the platform is provided on both sided with a short railing with pendulum gate.

Download brochure

Standard Maintenance Stair 13 Step Turning and Sliding- MST13-1200TS

The maintenance stairs are used for carrying out inspection and maintenance work on aircraft. The type designation TS identifies that the maintenance stair is equipped with a turning and sliding railing. The maintenance stairs consist of the running gear with the stair and platform. The step height is 250 mm, and the last step is designed as a platform. The running gear is provided with two wheels rear and front. The front axle is articulated, the rear axle is rigid. The stairs are equipped with a fixed railing, and the platform is provided on both sides with a turning and sliding railing with integrated safety gates for the front.

Download brochure

Standard Maintenance Stair 5 Step Large- MST5-1600

The maintenance stairs are used for carrying out inspection and maintenance work on aircraft. The maintenance stairs consist of the running gear with the stairs and platform. The step height is 250 mm, and the last step is designed as a platform. The stairs are equipped with a fixed railing, and the platform is provided on both sides with a swivel railing with integrated safety gates for the front. A tow bar for towing operation can optionally be fitted to the maintenance stair.

Download brochure

Maintenance stair 8 Step-MST8-UCAS

The maintenance stairs are used for carrying out inspection and maintenance work on aircraft. The maintenance stair consists of a chassis with staircase, an intermediate platform, and the top platform with an additional, extendible two-step stair. The chassis is equipped at the front with turntable steering and a tow bar, and at the rear with a  brace support (right and left). The stairway is fitted with fixed railings. The platform has a rotating slide railing on both sides and swivel safety gates for the front platform edge.

Download brochure

  • Facebook Basic Black
  • Twitter Basic Black
  • LinkedIn Basic Black

Headquarters

‚Äč

M: 00971 (0)50 522 9620

T:  00971 (0)4 578 4567

F:  00971 (0)4  289 9322

 

P.O. Box 54268

Dubai Airport Freezone

West Ring Road

Plot 3W

Dubai

United Arab Emirates

Email : office@gg-as.com